Printronix P8000 Series, Administrator'S Manual

Page: 83 / 422

OpenPrint P8000 HD Postscript/PDF Firmware
83
DBCS/ASCII Mode (H-Series)
This option specifies the operating mode of the Hanzi printer. If set to DBCS
mode, the printer can print double-byte characters and a limited number of
single-byte characters. Otherwise, the printer can only print single-byte
characters.
Available for the Hanzi and Kanji LP+ printers only.
DBCS ASCII Style (H-Series)
This option specifies the appearance of the single-byte numeric characters.
For the Hanzi and Kanji LP+ printer, select from Normal, Oversize and OCRB.
For the Hangul LP+ printer, select from Normal, and OCRB.
If set to Oversize, the numeric characters will appear larger than other
single-byte characters. For example, the appearance of character "8" will be
changed to "
8
". If set to OCRB, the numeric characters will print in OCRB
style.
Graphics Spd-Up (H-Series)
This menu is used to increase (speed up) graphic printing speed by turning on
Enhanced/Turbo mode.
•
Normal (factory default). The printer prints at the given input graphics
resolution.
•
Enhanced . The printer provides first-level speed up, which means the
speed is faster than Normal mode.
•
Turbo . The printer provides second-level speed up, which means the
printer is faster than Enhanced mode.
•
Match Typeface . The input 180 x 180 dpi graphics resolution will drop-
dot to the resolution matching the typeface selected.
Typeface (H-Series)
Sets the typeface of the printer. This key requires confirmation with the
ENTER key.
The factory default for the Hanzi GB and Kanji SJIS LP+ is Near LQ.
The factory default for the Hangul and Hanzi Big5 LP+ is LQ.
Active Emulation
The Active Emulation menu enables you to select a combination of
emulations as described in Table 4 on page 71.
Active IGP Emulation
The Active IGP Emulation menu enables you to activate either the PGL or
VGL emulation. This menu is only available with the P8000 Standard and TN
firmware as described in Table 4 on page 71.
QUICK SETUP Menu