Panasonic CF-S10 Series Operating Instructions Manual Download Page 73

Page: 73 / 96

roubleshooting

Question

Measure

Nothing is displayed
on the screen.

If the power indicator is lit, the display is turned off.

Press a key with no independent effect, such as

. Do not use a key

that may make a selection (

(Space),

, numeric keys,

and so on).

The display destination may be set to the external display.

Try changing the display destination by pressing

If you want to switch the display destination repeatedly by pressing

, make sure that the display destination has switched completely each

time before pressing

again.

The screen may become darker.

Press

to make the screen brighter. (



page 25)

If the power indicator

is blinking or is not lit, the sleep or hibernation is

entered.

Slide the power switch.

If an additional RAM module has been inserted or changed, RAM module
may be inserted correctly.

Power off your computer, check that the RAM module is the recommended
module, and insert it the module correctly.
If the problem persists, contact your technical support office.

DFQW5600ZA̲BasicManual̲CF-S10.indb 73

2011/11/15 14:08:37

Summary of Contents for CF-S10 Series

































































































Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands

Panasonic CF-S10 Series, Operating Instructions Manual

Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands