26
Getting Started
Starting Up/Shutting Down
Starting Up
For operating procedures from the time
of purchase to the start of first Windows
operations, refer to
Preparation and Setting
Guide
.
1
Slide and hold the power switch
until the power indicator
lights.
Power Switch/
Power Indicator
While booting, avoid the following until the
•
access indicator has turned off.
Connecting or disconnecting the AC
•
adaptor.
Touching the power switch.
•
Performing any keyboard, touch pad, or
•
external mouse operations.
Closing the display.
•
Sliding the drive power/open switch.
•
Connecting/disconnecting the SD/SDHC/
•
SDXC memory card.
2
Log-on to Windows.
Click the user
(user’s icon).
When the password is set, the screen
•
shown below will be displayed.
Input the password, then click
. Until the
correct password is entered, the computer will
not operate.
Confirm that character input is not set to
“Caps Lock” or “NumLK.” (
page 23).
The screen shown below is displayed
after turning on the computer.
Enter Password
To prevent unauthorized access of your
computer, the Supervisor Password or the User
Password has been set.
Enter your password and press
. When the
correct password is input, the computer will
start.
After 3 wrong password attempts have been made
or there is no input for one minute, the computer will
power off.
If the screen display disappears...
Because the power-saving setting is configured
at the time of purchase, if the computer is not
operated or devices are not accessed for a
certain period of time, the power-saving function
operates and the screen display may become
darker or disappear.
Operate the touch pad or keyboard to return the
screen to its original status.
Press a key that will not affect your work (such as
or
).
If the computer is not operated, it will enter sleep.
Slide the power switch to return the screen to its
original status. (
page 40)
sleep
If power is cut in sleep mode, all data is lost.
We recommend connecting the AC adaptor if the
sleep function is to be used.
If no access for a certain period of time
(default setting)
Display
darkens
Display
turns off
To reduces the wait time between
the time you turn on the computer
and the time Windows launches
You can reduce the Windows startup time after
turning on the computer by using Quick Boot
Manager to set [Boot Mode] to [Fast] in the
[Boot] menu of the Setup Utility or change the
Windows settings.
Reference Manua
l “
(Using Let’snote)”
DFQW5600ZA̲BasicManual̲CF-S10.indb 26
DFQW5600ZA̲BasicManual̲CF-S10.indb 26
2011/11/15 14:07:45
2011/11/15 14:07:45
