Panasonic CF-S10 Series Operating Instructions Manual Download Page 23

Page: 23 / 96

eparations

Status Indicator Lamps

CD/DVD Drive Indicator

Names

Status/Reference

Power indicator

Not lit: Power off / Hibernation mode

•

Green: Power on

•

Blinking green: Sleep mode

•

The brightness of the power indicator changes in keeping with the brightness level
of the internal LCD (default setting).
It you set [LED Brightness] to [Dimmer], the brightness remains dark and does not
vary.

Economy Mode
(ECO) indicator

This indicator will indicate the Economy Mode (ECO) status (Disabled/Enabled).

Not lit: Economy Mode (ECO) disabled

•

Green: Economy Mode (ECO) enabled

•

Blinking green: Economy Mode (ECO) enabled (Discharging until the remaining

•

battery power is 80 % or less)

Battery indicator

Not lit: Battery pack is not connected or no charging.

•

Orange: Charging in progress.

•

Green: Fully charged.

•

Red: The battery level is very low (the charge is approx. 9 % or less).

•

Blinking red/Blinking orange: Refer to “The battery indicator

•

is blinking” of

“Problems with Battery” (



page 70)

Caps Lock
indicator

This indicator lights green when

is pressed:

Subsequent non-shifted input is capitalized.

NumLk indicator
(Ten-key mode)

This indicator lights green when

is pressed:

Part of the keyboard (see figure below) will function as a ten-key numeric input.
To disable, press

once more (the indicator will turn off).

–

＊

)

(

＊

:
;

–

＊

Ten-key mode

The

functions differently depending on the Sleep application.

ScrLk indicator
(Scroll lock)

This indicator lights green when

(ScrLk) are pressed:

Scroll lock functions differently depending on the software application.

Hard disk/CD/DVD
access indicator

This indicator lights when the hard disk drive or CD/DVD drive is accessed.

SD memory card
indicator

This indicator lights when the SD/SDHC/SDXC memory card is accessed.

CD/DVD drive indicator

Not lit: Drive power is off or the disc cover is opened.

•

Green: Drive power is on.

•

How to switch the drive power on/off:



Reference Manual

“

(CD/DVD

Drive)”

DFQW5600ZA̲BasicManual̲CF-S10.indb 23

2011/11/15 14:07:34

Summary of Contents for CF-S10 Series

































































































Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands

Panasonic CF-S10 Series, Operating Instructions Manual

Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands