Panasonic CF-S10 Series Operating Instructions Manual Download Page 47

Page: 47 / 96

Getting Started

Remove the screw, then hold up

the cover.

Refer to the illustration in step 4.

Screw Cover

Place the RAM module lightly in

parallel with the RAM module
slot so that the notch of the RAM
module and the protrusion of the
RAM module slot is in the same
direction.

notch

protrusion

Slot (Side image view)

20° - 30°

RAM Module

Insert the module parallel to the

slot and press firmly until the
gold terminals are no longer
visible.

Gold Terminals

If the RAM module is difficult to insert, do

•

not force it. Check once more to ensure that
the module is positioned correctly.
The slot may be damaged if the following

•

procedure is performed without inserting the
module firmly.

Press the RAM module down

until the right and left hooks lock
into place.

Hooks

If it is hard to press down the RAM module,
do not try forcibly but check the module’s
direction.

Insert the cover at an angle, then

fasten the screw.

DFQW5600ZA̲BasicManual̲CF-S10.indb 47

2011/11/15 14:08:14

Summary of Contents for CF-S10 Series

































































































Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands

Panasonic CF-S10 Series, Operating Instructions Manual

Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands