Panasonic CF-S10 Series Operating Instructions Manual Download Page 95

Page: 95 / 96

Specifications

*34 Refer to “Hardware Diagnostics”.
*35 Perform on the HDD recovery partition. (If this software can not be performed on the HDD recovery

partition, perform from the recovery disc)

*36 The graphics accelerator of this computer supports up to DirectX 10.1.

To use Intel

Anti-Theft Technology and Intel

Identity Protection Technology (Intel

IPT), a dedicated solution

provided by a service provider is required.

Wireless LAN

•

Data Transfer Rates*

IEEE802.11a :

54/48/36/24/18/12/9/6

Mbps

IEEE802.11b :

11/5.5/2/1

Mbps

IEEE802.11g :

54/48/36/24/18/12/9/6

Mbps

IEEE802.11n

20MHz:

6/13/19/26/39/52/58/65/78/104/117/130

Mbps

20MHz, Short GI:

7/14/21/28/43/57/65/72/86/115/130/150

Mbps

40MHz:

13/27/40/54/81/108/121/135/162/216/243/270

Mbps

40MHz, Short GI:

15/30/45/60/90/120/135/150/180/240/270/300

Mbps

Standard Supported

ARIB STD-T66/ARIB STD-T71
IEEE802.11a (W52/W53/W56), IEEE802.11b, IEEE802.11g, IEEE802.11n*

Transmission Method

OFDM system, DS SS system

Effective Range*

IEEE802.11a: Approx.

unobstructed

IEEE802.11b/g/n:

Approx. 50

unobstructed (when communicating with an

access point)

Wireless
Channels
Used

Infrastructure
mode

IEEE802.11a/n:

36/40/44/48 Channels (W52)
52/56/60/64 Channels (W53)
100/104/108/112/116/120/124/128/132/136/140
Channels (W56)

IEEE802.11b/g/n:

1 - 13 Channels

Ad hoc mode IEEE802.11b/g:

1 - 11 Channels

RF Frequency Band

2.4

GHz

(2.4

GHz

- 2.4835

GHz

)

GHz

(5.15

GHz

- 5.35

GHz

, 5.47

GHz

- 5.725

GHz

*37 These are speeds specified in IEEE802.11a+b+g+n standards.

Actual speeds may differ.

*38 The description concerning support for IEEE802.11n is not a guarantee of

connecting with other products that support IEEE802.11n.

*39 The effective range differs depending on surrounding conditions such as the radio wave environment,

obstructions and the setup environment, and on usage conditions such as the software applications and
OS.

*40 Using the 5.2

GHz

/5.3

GHz

band (W52/W53) for communication outdoors is prohibited by the Radio Act.

Before taking this computer outdoors when using W52/W53 and with the wireless LAN power turned on,
set IEEE802.11a to be disabled. Using the 5.47

GHz

to 5.725

GHz

frequency band (W56) outdoors is not

prohibited by the Radio Act.

WiMAX

•

Data Transfer Rates*

Maximum for receiving

Mbps

(best effort system)

Maximum for transmission

Mbps

(best effort system)

Standard Supported

IEEE802.16e-2005

Transmission Method

OFDMA system

Effective Transmission
Range*

- 3

RF Frequency Band

2.5

GHz

(2595

MHz

- 2625

MHz

)

*41 The values displayed as the maximum communication speed for receiving and transmitting are not the

actual communication speeds (specification values for the mounted module).

*42 The effective range differs depending on surrounding conditions such as the radio wave environment,

obstructions and the setup environment, and on usage conditions such as the software applications and
OS.

DFQW5600ZA̲BasicManual̲CF-S10.indb 95

2011/11/15 14:08:56

Summary of Contents for CF-S10 Series

































































































Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands

Panasonic CF-S10 Series, Operating Instructions Manual

Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands