![background image](http://html.mh-extra.com/html/panasonic/cf-s10-series/cf-s10-series_operating-instructions-manual_264392094.webp)
94
Specifications
Specifications
*12 The external display connector is for connecting an external display for a computer. Some external
displays may not display correctly. When using your household television as the external display, check
the supported resolutions in the instruction manual supplied with the television.
When a HDMI-supporting display is connected, the display specifications, such as the maximum
output resolution, differ depending on the specifications of the connected device. For details, check the
specifications of the connected device.
*13 To communicate with the computer using IEEE802.11a, use a wireless LAN access point that supports
W52, W53 or W56. To communicate using a mode based on IEEE802.11n, a wireless LAN access point
that supports this mode is required. Also, the encryption settings for the computer and the wireless LAN
access point must be set in AES. For details, contact the manufacturer of your wireless LAN access point.
*14 Some devices cannot be used depending on the port type.
*15 Must be installed Infineon TPM Professional Package before use. For information on TPM, click
(Start)
and input “c:\util\drivers\tpm\README.pdf” in [Search programs and files] and press
, and refer to the
Installation Manual of “Trusted Platform Module (TPM)”
.
*16 Operation has been tested and confirmed using Panasonic SD Memory Card with a capacity of up to
2
GB
, Panasonic SDHC Memory Card with a capacity of up to 32
GB
, and Panasonic SDXC Memory Card
with a capacity of up to 64
GB
. Operation on other SD equipment is not guaranteed.
*17 USB 1.1/2.0 compatible. Does not guarantee operation of all USB-compatible peripherals.
*18 USB 1.1/2.0/3.0 compatible. Does not guarantee operation of all USB-compatible peripherals.
*19 Does not guarantee operation of all HDMI-compatible peripherals.
*20 Use a condenser-stereo microphone.
*21 Because this computer uses a power cord compatible with 100
V
AC, connect it to a 100
V
AC power
outlet. (
page 9)
20-J-1
*22 Operating time according to the “JEITA Battery Run Time Measurement Method (Ver. 1.0).”
Varies depending on the usage conditions, or when an optional device is attached.
When Economy Mode (ECO) is enabled, the operating time becomes approximately 20
%
shorter than
when it is disabled.
*23 When Economy Mode (ECO) is enabled, the charging time becomes approx. 5.5 hours (Power on/off).
Varies depending on the usage conditions, CPU speed, etc.
It may take a long time to charge a fully discharged battery.
*24 Approx. 0.7
W
when the battery pack is fully charged (or not being charged) and the computer is off.
(However, note it is approx. 1
W
during peak shift control.)
For the battery charge retention times in sleep/hibernation, refer to “Starting Up/Shutting Down” (
page 27).
Even if the AC adaptor is not connected to the computer, when it is connected to a power outlet, the AC
adaptor itself consumes power up to 0.3
W
.
*25 41.4
mm
at thickest point (excluding protrusions).
*26 Average value. May differ depending on models.
*27 When reinstalling Windows using the data of the recovery area on the hard disk, you can select the OS to
be installed (either Windows 7 (32-bit) or Windows 7 (64-bit)). An OS that has been installed at the time of
purchase or an OS that has been installed using the hard disk recovery function or the recovery disc can
be supported.
*28 The goo stick is not displayed on Windows 7 (64-bit).
*29 Must be installed before use.
*30 Some functions are not available.
*31 CPRM is rights management technology which is used when digital broadcasts with recording restrictions
are recorded to DVD-RAM, DVD-R or DVD-RW with a DVD recorder.
To play back such content, your operating environment must be connected to the Internet.
Once connected to the Internet, the content is recognized automatically and is available for playback.
From the next time, it can be played back without connecting to the Internet.
DVD-Audio playback is not supported. Some functions are not available.
*32 A software application for wireless projection. Used when connecting by wireless LAN or wired LAN to
a Panasonic projector (TH-LB20NT/TH-LB30NT/TH-LB50NT/TH-LB55NT/TH-LB60NT/PT-FW100NT/
PT-F100NT/PT-F200NT/PT-F300NT/PT-FW300NT/PT-LB51NT/PT-LB75NT/PT-LB80NT/PT-LB90NT/
PT-LW80NT/PT-DZ570/PT-DW530/PT-DX500/PT-F300/PT-FW300/PT-FW430/PT-FX400). For PT-DZ570/
PT-DW530/PT-DX500/PT-FW430/PT-FX400, a separate wireless module (sold separately) is required. Must
be installed before use.
*33 For details on the operating environment of a software application and its compatibility with Windows 7,
contact the manufacturer of the software application.
In Windows XP Mode, it is not guaranteed that all Windows XP functions will work or an equivalent
performance will be achieved. Must be installed before use.
DFQW5600ZA̲BasicManual̲CF-S10.indb 94
DFQW5600ZA̲BasicManual̲CF-S10.indb 94
2011/11/15 14:08:56
2011/11/15 14:08:56