Panasonic CF-S10 Series Operating Instructions Manual Download Page 82

Page: 82 / 96

roubleshooting

Troubleshooting

Reinstalling Software

Reinstalling

CAUTION

Do not interrupt the reinstallation procedure
before completion, for example by turning off
the computer, as this may prevent Windows from
starting up, or may cause data to be lost so that
the reinstallation procedure cannot be executed.

Back up important data to a

location other than the hard disk
(an external hard disk or other
media).

When reinstallation procedure is performed,
the contents of the hard disk will be erased.

If you have created partitions for data, the

•

data may be erased or become corrupt
as a result of an unexpected malfunction,
incorrect operation, or other reason.

Make a note of the network

’

settings.

When reinstallation procedure is performed,
the network’s settings will be erased.

Make a note of your user name

and password.

When reinstallation procedure is performed,
your user name and Windows password will be
erased.

Turn off the computer, and

connect the AC adaptor.

Turn on the computer, and press

while [Panasonic]

boot screen is displayed to start
up the Setup Utility.

Press

Del

If the [Panasonic] boot screen is not

•

displayed, turn on the computer while
holding down

. Hold down

until the Setup Utility screen or

password input screen appears.
When the password is set, [Enter Password]

•

will be displayed. Enter supervisor
password, and press

Enter Password

You cannot set default settings (except the
password, System Time and System Date)
with a User Password.
If you change the settings from that at the

•

time of purchase, we recommend that
you make a note of the settings that are
changed.

Press

At the confirmation message,

select [Yes] and press

Load Optimized Defaults

Load Optimized Defaults?

Yes

Press

, and then select [Yes]

at the confirmation message and
press

The Setup Utility will close, and the computer
will restart.
If the password has been set, enter the
Supervisor Password, and press

DFQW5600ZA̲BasicManual̲CF-S10.indb 82

2011/11/15 14:08:46

Summary of Contents for CF-S10 Series

































































































Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands

Panasonic CF-S10 Series, Operating Instructions Manual

Search results

Summary of Contents for CF-S10 Series

Reviews:

Related manuals for CF-S10 Series

Brands by name

Popular brands