![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321291.webp)
3
Compensate
image
FZ3 Processing Items List Manual
Trapezoidal Cor
289
Setting item
Pattern 1
Pattern 2
Camera: Fixed tilt
Work: No chatter
Camera: Fixed vertical
Work: Chatter
Reference position
Figure
Figure
Measurement position
Figure
Expression
Pattern 1:
When the camera is installed tilted and there is no chatter in the work
●
Reference:
See the setting example (p.289) for when there is no chatter in the work
Pattern 2:
When the camera is installed vertical and there is chatter in the work
●
Reference:
See the setting example (p.291) for when there is chatter in the work.
Setting Example for when There Is No Chatter in the Work
Even when there is a mechanical structure and the camera cannot be installed from the front, 4-point
position information can be used to compensate for distortion in the image.
When you specify the four points used for distortion compensation and specify the positions where those
four points should be as reference positions, the parameters for distortion compensation are set
automatically.Each time a measurement is made, the distortion is automatically compensated for using
these parameters.
Acesst 1.0 6251194
Summary of Contents for XPECTIA FZ3
