Omron XPECTIA FZ3, User Manual

Page: 218 / 440

2
Measurement
216 Defect FZ3 Processing Items List Manual
When the measurement results are unstable
Noise is detected as defects.
Parameter to be adjusted Remedy
Measurement Specify a larger value for "Defect judgement" in the judgement conditions.
Judgement will be NG.
Parameter to be
adjusted
Remedy
Measurement
Make the measurement region larger than the lower limit of the defect size.Or make the lower
limit of the defect detection size smaller than the measurement region.
When the processing speed is slow
Parameter to be
adjusted
Remedy
Measurement
Specify a larger value for the "Defect size".
Reduce the difference between the upper and lower limits of "Defect size".
Measurement Results for Which Output Is Possible (Defect)
The following values can be output using processing items related to results output.It is also possible to
reference measurement values from expressions and other processing units.
Measurement items
Character
string
Description
Judgement JG Judgement result
Defect F Measured defect level
Position of defect X X Coordinate of measured defect position
Position of defect Y Y coordinate of measured defect position
Defect area AR The measured maximum defect area
Defect gravity GX The center of gravity X coordinates of the measured maximum defect area
Defect gravity GY The center of gravity Y coordinates of the measured maximum defect area
Acesst 1.0 6251194