![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321151.webp)
2
Measurement
FZ3 Processing Items List Manual
Scan Edge Width
149
Difference
R, G, B
This sets the allowable color difference for detecting the edge, using the specified
color as the reference.The larger the difference values, the larger the color range
that is used to detect the edge.
Detection
mode
Color IN: The position where a color other than the specified color changes to the
specified color is detected as the edge.
Color OUT: The position where the specified color changes to a color other than the
specified color is detected as the edge.
Measurement Parameters (Scan Edge Width)
Measurement parameters can be changed as needed to address unstable measurement
results.Normally, the factory default value will be used.
After changing a setting, check whether measurement can be done properly by performing an actual
measurement.
1.
In the Item Tab area, tap [Measurement].
The edge profile of the measurement region is displayed as a graph in the Image Display area.
2.
Set the value of each item in the "Display area" area.
Acesst 1.0 6251194
Summary of Contents for XPECTIA FZ3
