Omron XPECTIA FZ3, User Manual

Page: 153 / 440

2
Measurement
FZ3 Processing Items List Manual Scan Edge Width 151
Setting item
Set value
[factory default]
Description
Measure
type [ Projection]
Derivation
This sets the type of edge measurement.
Density
change [Light
→
Dark]
Dark
→
Light
Select whether a black-to-white change or a
white-to-black change should be recognized as a
density change in the specified region.
Edge level
●
Position (%) for width of
a density
0 to 100 [50]
●
Value of density
0 to 255 [20]
Select the density change level to be detected as
edges.
Reference:
See "User's Manual", "Edge level" (p.304)
4.
If necessary, set each item in the "Noise removal" area.
Setting item
Set value
[factory
default] Description
Noise level
0 to 442
[5] When detection is affected by noise, increase this value.
Reference:
See "User's Manual", "Noise level" (p.305)
Noise width
0 to 9999
[0]
Set the width for judging noise.
When detection is affected by noise, increase this value.
Reference:
See "User's Manual", "Noise width" (p.306)
Judgement Conditions (Scan Edge Width)
Specify the range to be judged as OK.
1.
In the Item Tab area tap [Judgement].
2.
Set up the judgement condition.
Note
●
The values beside each item are measurement results of the displayed image.Take these values into
consideration to determine the upper and lower limits.
Acesst 1.0 6251194