Omron XPECTIA FZ3, User Manual

Page: 107 / 440

2
Measurement
FZ3 Processing Items List Manual Classification 105
List of Classification Items
Item name Description
Model
register
This item registers the pattern characteristic of the measurement image as a model.
Model parameter values can be changed as needed to address unstable measurement results or to
increase the processing speed.Normally, the factory default value will be used.
Reference:
Model Registration (Classification) (p.105)
Region
setting
This item is used to set up the measurement area.
Instead of measuring the entire input image, narrowing the measurement area shortens the
processing time.
Reference:
Region Setting (Classification) (p.109)
Measurement
This item specifies the judgement condition for measurement results.Specify the criteria to judge the
measurement result if the X and Y coordinates and the correlation with the model are OK.
Reference:
Measurement Parameters (Classification) (p.110)
Output
parameter
This item can be changed if necessary.Normally, the factory default value will be used.
Use the output parameter to specify how to handle the coordinates.
Reference:
Output Parameters (Classification) (p.111)
Model Registration (Classification)
Pre-register as models the sections to be used as reference for classification.
Models can be registered with any of 36 indexes, from 0 to 35, and up to 5 models can be registered for
each index.
When there is variation among the model print quality and shapes, pre-register multiple models for the
same index.
1.
In the Item Tab area, tap [Model register].
Acesst 1.0 6251194