![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321240.webp)
2
Measurement
238
Character Inspection
FZ3 Processing Items List Manual
2.
Place a check at the character(s) to use for character inspection.
4.
Tap [OK].
The model dictionary to use is set.
Region Setting (Character Inspection)
This item is used to set up the measurement area.
Instead of measuring the entire input image, narrowing the measurement area shortens the processing
time.
This item specifies the measurement region of [Character Inspection] using a rectangle.
1.
In the Item Tab area, tap [Region setting].
2.
Tap [Edit].
The figure setting area is displayed.
3.
Specify the area in which to search for the model.
The rectangle covering the entire screen is set. Adjust the size and position of the rectangle.
4.
Tap [OK].
The area to measure is registered.
Note
Number of characters that can be inspected
●
Up to 32 characters can be inspected in the measurement region.
Measurement Parameters (Character Inspection)
Set the character inspection contents, the trimming method and the judgement conditions for the
measurement results.
Acesst 1.0 6251194
Summary of Contents for XPECTIA FZ3
