Omron XPECTIA FZ3, User Manual

Page: 289 / 440

3
Compensate
image
FZ3 Processing Items List Manual Trapezoidal Cor 287
Setting item
Set value
[Factory default]
Description
Conv.
method
●
4 unit
reference
●
[Calculation]
Set the expression used for image conversion
4-unit reference: The parameters are set referencing the
reference coordinates and measurement coordinates for the
immediately preceding 4 units.
To set the reference position and measurement position with
4-unit reference, it is necessary to set the measurement position
setting method to expression.To modify the expression for the
reference position and measurement position set with 4-unit
reference, select the Expression.
Source
image
●
Camera
image
●
[ Prev image ]
Set the image to be compensated.
Interpolation
●
None
●
[Bilinear]
Set the interpolation between pixels for image conversion.
To reduce conversion time more than raise compensation
precision, set "None".
3.
Set the reference position.
Setting item
Set value
[Factory default]
Description
Setting
method
●
[Figure]
●
Operation
Set the method for setting the reference position.
When fixed value is selected, specify the vertex position on the
image.
After setting with an expression, if the setting is changed to a
fixed value, the result of the expression is reflected as a fixed
value.
When Expression is chosen
Tap [Edit].
Tap [...] and set the expression.
Reference: Layout of Setting Expression Window (p.333)
Acesst 1.0 6251194