Omron XPECTIA FZ3, User Manual

Page: 132 / 440

2
Measurement
130 Edge Pitch FZ3 Processing Items List Manual
2.
Specify each of the following items.
Setting item
Set value
[factory
default] Description
Output
Coordinates
●
[After
scroll]
●
Before
scroll
As measurement results, select whether to output coordinate values
to external devices before or after the position deflection correction is
applied.
Calibration
●
[OFF]
●
ON
Select whether to reflect the calibration in the values output to the
external device as measurement results.
ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
Reflect to
overall
judgement
●
[ON]
●
OFF
Enables choosing whether or not the judgement results of this
processing unit is reflected in the scene overall judgement.
Key Points for Test Measurement and Adjustment (Edge Pitch)
The following content is displayed in the "Detail result" area as text.
Displayed items Description
Judge Judgement result
Number of edges Number of edges
Average pitch Average edge pitch
Max. pitch Edge maximum pitch
Min. pitch Edge minimum pitch
Average width Average edge width
Max. width Edge maximum width
Min. width Edge minimum width
Key Points for Adjustment
Select the adjustment method referring to the following points.
Parameter to
be adjusted
Remedy
Edge color If edges cannot be detected properly, specify a larger value for the color variance range.
Measurement If noise is detected as an edge, specify a larger value for "Noise level" and "Noise width".
Acesst 1.0 6251194