Omron XPECTIA FZ3, User Manual

Page: 141 / 440

2
Measurement
FZ3 Processing Items List Manual Scan Edge Position 139
Setting item
Set value
[factory default]
Description
Edge No.
0 to 99
[0]
Specify the edge number used to extract edges.
Edge numbers are assigned to detected edges starting from 0
and going on in the direction from the start point (the arrow
point) to the end point (the direction of arrow) in the selected
area.
Edge level
●
Position (%) for
width of a color
0 to 100 [50]
●
Value of color
0 to 442 [20]
Select a color difference level with which the edge is detected.
Reference:
See "User's Manual", "Edge level" (p.304)
Edge color
level 0 to 442
[100] This emphasis level can be specified only if the edge color to
detect is specified.
For monochrome cameras:
Setting item
Set value
[factory default]
Description
Measure
type [ Projection]
Derivation
This sets the type of edge measurement.
Density
change [Light
→
Dark]
Dark
→
Light
Select whether a black-to-white change or a white-to-black
change should be recognized as a density change in the
specified region.
Edge No.
0 to 99
[0]
Specify the edge number used to extract edges.
Edge numbers are assigned to detected edges starting from 0
and going on in the direction from the start point (the arrow point)
to the end point (the direction of arrow) in the selected area.
Edge level
●
Position (%)
for width of a
density
0 to 100 [50]
●
Value of
density
0 to 255 [20]
Select the density change level to be detected as edges.
Reference:
See "User's Manual", "Edge level" (p.304)
Acesst 1.0 6251194