Omron XPECTIA FZ3, User Manual

Page: 344 / 440

4
Support
measurement
342 Line Regression FZ3 Processing Items List Manual
Function Selection (Line Regression)
Functions are selected depending on application.
1.
In the Item Tab area, tap [Select function].
2.
Select a function.
Setting item
Set value
[Factory default]
Description
Select
function
●
[Calculate line]
Calculates a straight line providing the shortest distance from
multiple points (Line Regression).
Set the Line 0 tab.
●
Calculate cross
point and angle
of two lines
Calculates the intersection and angle between 2 Line
Regressions.
Set the Line 0 tab and Line 1 tab.
●
Calculate
distance
between line and
point
Calculates the distance between a Line Regression and a
point.
Set the Line 0 and Point tab.
Line 0 (Line Regression)
1.
In the Item Tab area, tap [Line 0].
2.
Set each item in the "Parameter" area.
Setting item
Set value
[Factory default]
Description
Noise cancel
●
[OFF]
●
ON
When a check is placed at [ON], an approximate line is found by
excluding the points with large deviation among the measured
points.
Method
●
[Nearest unit]
●
Calculation
Nearest unit: Calculated from data of several continuous
coordinate measurement units that were just performed.The
number of units referenced is indicated by the Number of points.
If a unit where coordinate measurement is not performed is
included in Nearest unit, calculation will not be performed
properly and measurement will be NG.
Calculation: Calculated from expression set up.
Reference:
When Calculation is Selected (p.343)
Number of
points
[2] to 8 Set up the number of coordinate points used for calculation.
3.
Tap [OK].
Acesst 1.0 6251194