Omron XPECTIA FZ3, User Manual

Page: 278 / 440

2
Measurement
276 Circle Angle FZ3 Processing Items List Manual
Note
●
The center position of the measured object should be always fixed in order to efficiently use the Circle
Angle.Prior to Circle Angle, processing items related to position correction should be performed, making the
central coordinates of the measurement object stay at a fixed position.
Example)
Settings Flow (Circle Angle)
The Circle Angle should be set up with the following procedure.
List of Circle Angle Items
Item name Description
Region
setting
This item is used to set up the measurement area.
Instead of measuring the entire input image, narrowing the measurement area shortens the
processing time.If measurement results are unstable, change detection conditions as needed.
Normally, the factory default value will be used.
Reference:
Region Setting (Circle Angle) (p.277)
Output
parameter
This item can be changed if necessary.Normally, the factory default value may be used.
Select the measurement result coordinates and set how to handle the coordinates.
Reference:
Output Parameters (Circle Angle) (p.279)
Acesst 1.0 6251194