Omron XPECTIA FZ3, User Manual

Page: 234 / 440

2
Measurement
232 Fine Matching FZ3 Processing Items List Manual
Sort
condition
Specify the conditions by which label number is re-assigned.
When sorting referencing the X and Y coordinates, the upper left is the origin.This
will not affect the coordinate systems set up through the [Camera Image Input]
calibration.
Area ascending
Number re-assigning begins from the labels with
smaller areas.
[Area descending]
Number re-assigning begins from labels with larger
area.
X ascending
Number re-assigning begins from the label with a
smaller gravity X coordinate.
X descending
Number re-assigning begins from the label with a
larger gravity X coordinate.
Y ascending
Number re-assigning begins from the label with a
smaller gravity Y coordinate.
Y descending
Number re-assigning begins from the label with a
larger gravity Y coordinate.
Label area [0] to [999999999] Specify the range of the area to be judged as a label.
3.
When the setting has been changed, tap [Measurement] in the Detail area to verify whether
measurements can be made correctly.
Acesst 1.0 6251194