www.carcomm.nl
www.carcomm.nl
1
Carcomm Navigation Cradle
Carcomm Navigation Cradle
© Copyright Carcomm International BV 2006. Subject to change without previous notice.
All used brandnames are owned by their respective owners
CNM-71 Pioneer AVIC S1
CNM-71 Pioneer AVIC S1
Introduction
WARNINGS
This installation manual has been prepared to provide the basic information needed to
install the Carcomm Navigation Cradle. This manual is not intended to be definitive,
because there are different models and types of vehicles which will require different
installation work. The information given is for general guidance only.
The terms of warranty demand that this mobile navigation cradle is installed by an
experienced installer. An end-user should never attempt to install this mobile
navigation cradle without professional assistance as the installation requires special
tools and knowledge.
Note: Thoroughly read the manual before beginning the installation procedure.
1. Ensure that the vehicle’s battery is disconnected before you start the installation
procedure and that it remains disconnected during the procedure.
2. Do not smoke or use open flames when working near the vehicle’s fuel system.
3. Ensure that the vehicle’s electrical cables, hydraulic lines, fuel lines and safety
equipment are not damaged during the installation.
4. Ensure that normal control and operation of the vehicle is not obstructed by the
installation, particularly the brakes and steering. Ensure that airbag operation is not
obstructed.
5. Electronic and other sophisticated systems (for example speed control, ABS anti-lock
brake, fuel injection-, navigation- and airbag systems) are relatively immune to
malfunction. However, should you experience false operation of these systems or are
in any doubt whatsoever as to their functionality, please consult the vehicle’s dealer.
6. The mobile navigation cradle is suitable for use only in vehicles with 12 / 24V, negative
grounding. Use on other supply voltages or alternative polarity will damage the
equipment.
7. The Avic S1 should not be left switched on for extended periods without running the
vehicle’s engine. Failure to comply could drain the vehicle’s battery.
Before starting the installation of the Mobile Navigation Cradle please check if the
following contents are present :
- Carcomm Navigation Cradle
- Carcomm TMC Adapter ( to connect a Pioneer TMC module to the cradle )
- Rotating Swivel
- Window Mount
- Suction Cup
- Fuse Holder cable with fuse
- Screw sets
- Surface cleaner
- Manual
- Click-On adaptor
Compatible devices
Pioneer AVIC S1
