JEHNERT Sound Design | Im Michelreis 14 | D-72124 Pliezhausen | Tel. 07127 / 93457-0 | Fax 07127 / 93457-10 | [email protected] | www.jehnert.de
Assembly instruction
Status: 02.11.2023
VW Bus T6
cab system 65400-2
Art. N0. 65400
1
3-Way-Cab system 65400-2
Radio Adjustment Notice:
To achieve the best sound, all settings on the radio (bass, treble, loudness, etc.) should be set to
should be set to zero or neutral.
Installation note:
To avoid vibration noise, secure all wiring harnesses with insulating tape or similar.
Warranty:
As the manufacturer, we warrant these sound systems for 2 years from the date of purchase from the dealer. Within this warranty period, we will, at our
option, repair or replace free of charge all defects that are based on material or manufacturing defects. Excluded from the warranty are damages caused
by improper use or installation, wear and tear or interventions by third parties. The warranty does not cover consequential damage or defects that
only insignifi cantly impair the value or usability of the sound systems. A warranty obligation is not triggered in the case of damage caused by external
infl uences. Systems with additional or incorrect mounting holes are excluded from exchange. These are damages to the components that cannot be
repaired.
Installation instructions: Sound system VW Bus T6 Article 65400
Packing List:
2x XE 26 - neodymium tweeter ø 26mm
2x XE 80 - high-end midrange driver, ø 80mm
1x midrange module (right + left) cover: imitation leather in gray or anthracite
2x XM 165 - low-midrange driver „Power-Woofer“ ø 165mm
2x adapter ring for XM 165 part no. 271320-24
2x 3-way crossover VW T6 - item no. 65400 plug&play 2-piece
1x Mounting template for A-pillar
1x mounting kit woofer: 12x countersunk screw M4 x 16 (hexagon)
12x washer 5mm
12x M5 polystop nut
8x pan-head screw 3,9x16
1x mounting kit mid-high: 2x screw M 4 x 25
4x screw M 4 x 40
4x screw M 4 x 45
12x washer ø 12mm
12x nut M4
Optional on order: Vehicle specifi c radio connection cable for factory VW radio
