3-73
3-4 Cable and Connector Specifications
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
3
Specifications
Connector-Terminal Block Conversion Unit (XW2B-20Gx)
The Unit is used with a Connector Terminal Block Cable (XW2Z-xJ-B34). They convert the
control input signal (CN1) of the G5-series Servo Drive into a terminal block.
Terminal Block Models
XW2B-20G4
Precautions for Correct Use
Use 0.3 to 1.25 mm
2
wire (AWG22 to 16).
The wire inlet is 1.8 mm (height)
2.5 mm (width).
Strip the insulation from the end of the wire for 6 mm as shown below.
Model
Description
XW2B-20G4
M3 screw terminal block
XW2B-20G5
M3.5 screw terminal block
XW2D-20G6
M3 screw terminal block
3.5
3.5
2-
φ
3.5
67.5
5.08
29.5
15.5
20.5
38.1
(45.3)
45
2
1
1
2
20
19
19
20
Terminal block
Flat cable connector (MIL type plug)
Dimensions
6 mm
