Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 55 / 225

36
“Scr list” Screen
Section 3-5
[Attrib] [F4] Set attribute . . .
Used to set screen attributes. Setting is accomplished by making selections in the
Help Message area. The following attributes can be set.
Attribute Possible Settings
“NT Model” Setting
Remarks Attribute Possible Settings
20S 20M 600S 600M 30 30C 610G 610C
Remarks
Buzzer
None, Cont (continuous sound),
Long (long intermittent sounds),
Shrt (short intermittent sounds)
f f f f
: Continuous
sound,
Intermittent
sounds
History No, Yes
f f f f f f f f
Bit In
Off, Touch SW (touch switch),
Extd I/O
/
×
f
/
×
/
×
f
/
×
− /
×
− /
×
f
/
×
f
/
×
Direct connection
used/not used
: F keys cannot
be set.
Alarm
No, Yes
×
f
×
f
× ×
: Cannot be
used with
NT620S/
NT620C
Keypad System, User
f f f f f f f f
Back light Lit, Flash
f f
× ×
f f
− −
Bklt Col White, Red
×
f
× ×
f
×
− −
Back Col Screen background colors − − − −
×
f
×
f
f
: Possible : Partly possible (some restrictions apply).
×
: Not possible, − : No display
For details on each attribute, refer to the Operation Manual for the PT.
The attributes of the parent screen are used in the case of
continuous screens and overlapping screens. Screen
attributes set for child screens are invalid.
Batch setting of attributes for all marked screen numbers is possible.
[Read] [F5] Read screen data . . .
Used to read screen data and memory table data from other files.
However, the data of files displayed in red cannot be read as it is: data conversion
is necessary (see Section 8).
(1) Press the [F5] (Read) key.
(2) Select the file whose data is to be read and press the key.
"
Pressing the [F1] (Drive) key allows the specification of a file in another drive
directory. Only files for which the “Direct Access” setting is the same can be
specified.
WARNING