Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 99 / 225

80
Creating Fixed Displays
Section 4-3
4-3 Creating Fixed Displays
This section describes how to create fixed characters and graphics in screen data.
The following characters and graphics can be created.
Characters (fixed display), marks (display)
Continuous lines, squares, polygons, circles/arcs, fans, tilings
When using an NT20S, NT20M, NT600S, or NT600M, only characters (fixed dis-
play), continuous lines, and circles can be used (arcs cannot be used).
4-3-1 Inputting Characters
Characters to be displayed have to be input. For details on the display of charac-
ter-strings and numeric values, setting the display color (NT30C or NT610C), set-
ting numeral tables, and setting words and bits, see 4-2 “Common Setting Opera-
tions” (p.61).
Procedure 1. Select “FIX DISP” on the initial editing screen.
The fixed display menu will be displayed.
2. Select “STR IN”.
3. Input the characters to be displayed at the keyboard and press the key.
"
Pressing the [F3] (Mark) key enables mark input.
"
With the NT30, NT30C, NT612G, and NT610C, pressing the [F4] (Image) key
enables image input.
4. Set the Details and press the key.
5. If using an NT30C or NT610C, set the character color and background color.
6. Press the key with the cursor on “Exec”.
7. A box indicating the size of the character data is displayed.
Move this box to the required display position and press the key. The char-
acters will be displayed.
8. Press the [Esc] key to quit character input.