Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 195 / 225

176
Printing Data
Section 6-1
6-1-1 Things that can be Done Using the Data Printing Function
Various data relating to the support tool, such as screen data and the conditions of
use of memory tables, can be printed out at a printer and checked.
S
Specifiable output destinations
Any of the following three output destinations can be specified:
Printer: Screen images, various settings, etc., can be
printed out at a printer.
File (specify the file name): Various settings and other data can be output as
a DOS text file. However, screen images cannot
be output to a file.
Display: Screen images, various settings and other data,
can be displayed on the screen.
S
Types of data that can be displayed
Printing can be initiated in one of two ways: by selecting “Print” on the “File
Selection” screen or by selecting “Print” on the “Screen Selection” screen. The
data that can be printed differs according to the method used.
S
When “Print” is selected on the “File Selection” screen
(1) Print out of the file list
(2) Print out of the screen list
(3) Print out of screen images
(4) Print out of cross-references (the conditions of use of memory tables)
(5) Print out of display history records received from the PT
(6) Print out of the mark list
(7) Print out of image/library data
S
Cannot be specified with an NT20S, NT20M, NT600S, or NT600M
(8) Printout of direct connection information (only when using direct connection)
The mark list can only be output to the printer.
S
When “Print” is selected on the “Screen Selection” screen
The following information can be specified, in single screen units.
(1) Screen images
(2) Color printing (NT30C and NT610C)
(3) Detailed information
Before attempting printing, make sure that the printer is connected and that
there is paper in the printer.