Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 12 / 225

xi
Organization of the Manual, and How to Use It:
The related manuals are listed below.
* The final digit of the manual number is the revision code.
[For operating the support tool]
S
NT-series Support Tool Operation Manual (V028-E1-1)
This manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The support tool displays details of operations and procedures on the screen in
the form of “help messages”. Normally, operations can be performed by follow-
ing these messages.
However, if you become unsure how to proceed during the course of an opera-
tion, or want to check the capabilities of the support tool, refer to this manual.
This manual only describes the operations pertinent to the support tool itself. It
does not give detailed explanations of the meanings or effects of the items to be
set. For this information, refer to the manuals below.
[For information on PT functions, operations, and restrictions]
S
NT20M/NT2000M Programmable Terminal Operation Manual (V001-E1-2)
S
NT20S Programmable Terminal Operation Manual (V020-E1-2)
S
NT600M Programmable Terminal Operation Manual (V002-E1-2)
S
NT600S Programmable Terminal Operation Manual (V022-E1-1)
S
NT30/NT30C Programmable Terminal Operation Manual (V034-E1-1)
S
NT612G Programmable Terminal Operation Manual (V024-E1-1)
S
NT610C Programmable Terminal Operation Manual (V025-E1-1)
S
NT620S/NT620C Programmable Terminal Operation Manual (V033-E1-1)
These manuals contain full descriptions of PT functions, operations, and restric-
tions. They are organized in a manner that allows screen data to be created by
following the User’s Manual for the PT.
[For communication between the PT and host]
S
NT-series Direct Connection Operation Manual (V026-E1-1)
The functions that can be executed and the methods for these functions differ
widely according to the host interface unit. The user’s manuals for the host inter-
face units have been compiled with the PT, the PC, and the communication for-
mat taken into consideration.
Anyone familiar with the functions of the PT can create screen data by referring to
the manual for the host interface unit alone.
[For information on the functions and operations of the PC]
S
User’s manual for each PC
When you need information about the operations, functions, etc., of the PC, refer
to the operation manual for the PC, advanced function unit, or communication
unit being used.