Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 95 / 225

76
Common Setting Operations
Section 4-2
Short cut keys can also be used (see p.55).
Example
Specifying link relays (LR) for allocated bits:
Input After Input
[ ] [ ]
[L01] [L000001]
[LR0212] [L000212]
[12] [ 000012]
[Ir5601] [L005601]
[ LR914] [L000914]
[L999999] [L006300]
Reference Input Procedure
If you are not sure of the types of bit and channel that can be specified, it is possible
to display a list of the types that can be specified and select the type from among
these. It is also possible to input a comment at this time.
<Setting method>
Procedure 1. Press the key in the allocated bit/word input field, then press [F1] (Ref
Inpt).
The window shown below will be displayed.
2. Specify the type of bit or word by pressing the corresponding function key. If a
type that cannot be input in the input field is selected, the selection is ignored.
3. Input the bit or word number with the numeral keys and press the key. If the
input number exceeds the upper limit, a warning “pip” will sound and the num-
ber will be changed to the maximum possible value.
If input is performed correctly, the cursor will shift to the comment input field.
4. If required, input a comment, then press the key. If no comment is re-
quired, just press the key.
The window closes, and the bit/word number and comment are displayed in
the original input field.