90
Creating Fixed Displays
Section 4-3
4-3-6
Creating Circles/Arcs
This is the procedure for drawing circles and arcs.
Arcs cannot be created when using an NT20S, NT20M, NT600S, or NT600M.
Procedure 1.
Select “FIX DSP” from the initial editing menu.
The fixed display menu will be displayed.
2.
Select “CIRC/ARC” from the fixed display menu.
3.
Select the display attribute with “Detail”
The selectable options are “normal”, “inverted”, “flashing”, and “spot”.
The selected attribute will be valid only for circles.
When using an NT20S, NT20M, NT600S, or NT600M, the attribute is fixed as
“normal”.
4.
If using an NT30C or NT610C, specify the line color.
5.
Press the
key with the cursor on “Exec”.
6.
Draw the circular/arc.
1) Press the
key at the center of the circle or arc.
2) Move the cursor to set the size of the circle or arc and press the
key.
3) For a circle:
After setting the size, simply press the
key once more.
For an arc:
Locate the cursor at the end point of the arc. Specify the direction in which
the arc is to be drawn with the [Insert] key, then press the
key.
Start point of the arc
Center
End point of the arc
(
)
(
)
(
)
7.
Press the [Esc] key to quit circle/arc drawing.
Summary of Contents for NT - SUPPORT TOOL 07-1995
