Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 21 / 225

2
Preparing Equipment
Section 1-1
1-1 Preparing Equipment
The following equipment and materials must be prepared in order to use the sup-
port tool.
1-1-1 Equipment to be Prepared
Software
S
NT Series Support Tool (Type NT-ZA3AT-EV2)
This software comes in the form of a 3.5 inch floppy disk.
S
DOS
IBM DOS, Ver.5.02 or later version is required.
Hardware
S
IBM PC/AT Personal computer
At least 640 Kbytes of main memory is required.
Use an IBM personal computer or 100% compatible.
S
At least one floppy disk drive (2HD format type)
There must be one 3.5 inch drive.
S
Display
VGA compatible display
When creating screen data for an NT30C/NT610C/NT620C, a color display is re-
quired.
S
Mouse
Serial mouse or bus mouse
A Microsoft mouse driver is required.
[Common Items]
S
Printer
EPSON ESC/P printer (24 pin) or HP LASER Jet.
S
Hard disk drive
A hard disk is essential. The available area required for the support tool files and
data area is 2 Mbytes.