Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 192 / 225

173
Library Data
Section 5-3
Reading From Existing Screen Data
Existing screen data can be read onto the library editing screen.
The only data that can be read is fixed displays on the
specified screen.
Reference: Read graphics are overlapped with any graphics that are already present on the
library editing screen, leaving these existing graphics in place.
Procedure 1. Select “READ SCR” from the library editing menu.
2. Locate the bar cursor on the code of the screen from which the graphic is to be
read and press the
key.
Displaying Library Data Use the following method to display library data.
Select “Image & Lib” from the initial editing screen to allow select of library data
from the image/library selection screen (the library codes are FA20 to FAFF, FB20
to FBFF, FC20 to FCFF, and FD20 to FDFF).
For details on the procedure, see 4-11 “Inputting Image and Library Data” (p.141).
Library data can also be set for the ON and OFF codes of image/library lamps. For
details, see “Setting Image/Library Lamps” (p.102).
WARNING