Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 141 / 225

122
Creating Graphs
Section 4-8
7. Set the required display settings for the trend graph.
These settings have to be made for each broken line.
S
Ref Way: Specify the method used to reference the memory
table used for the display here.
Only the “Direct” setting is valid. Do not specify the
“Indrct” setting.
S
Ref Table: Specify the number of the memory table to be refer-
enced here.
Pressing the [F1] (Lst Slct) key enables selection from
a memory table list.
S
100% Val:
S
0% Val:
S
− 100% Val: Specify the reference methods for 100%, 0%, and
− 100% values. If “Num Table” is specified, specify the
numeral table number.
Pressing the [F1] (Lst Slct) key while “Num Table” is
specified allows the memory table to be selected from
a displayed list.
S
Display %: Specify whether or not a percentage value is displayed
on the screen.
S
Line: Specify the line type for the broken lines.
(Sold Lin, Brkn Lin, 1 Dot Chn, 2Dot Chn)
S
Line Col: Specify the display color of the broken lines (NT30C,
NT610C only).
S
% Disp Det: Specify the label display settings.
Display attributes and smoothing cannot be specified
with the NT20S, NT20M, NT600S, or NT600M. It is
also not possible to specify a scale of x64 when using
an NT20S or NT20M.
S
% Col Set: Specifies the character color and background color of
the “%” character (NT30C, NT610C only).