Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 116 / 225

97
Setting Numeral Displays
Section 4-4
4-4-2 Modifying Numeral Displays
The contents and position of numeral displays created on the screen can be modi-
fied.
Procedure 1. Select “NUM DISP” on the initial editing screen.
"
It is also possible to proceed straight to step 3. by left clicking on the numeral
display to be modified (see p.57).
2. In the window, select the entry corresponding to the numeral display to be mo-
dified and press the
key.
"
It is also possible to make the selection by locating the mouse cursor on the
numeral display to be modified and clicking the left mouse button.
3. Select the required item in the window and execute the modification.
S
Num Disp Setting: Select to change settings such as the referenced
memory table, the scale, and the attribute.
S
Display Position: Select to change the display position.
4. Press the [Esc] key to quit modification.