Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 123 / 225

104
Setting Lamps
Section 4-6
4-6-2 Modifying Lamps
It is possible to modify the contents, shape, and position of created lamps.
Procedure 1. Select “LAMP” on the initial editing screen.
"
It is also possible to proceed straight to step 3. by left clicking on the lamp to be
modified (see p.57).
2. Select the type of modification from the options in the window (“Lamp Type
Set” column) and press the
key.
"
It is also possible to select the lamp to be modified by left clicking on it (this ap-
plies to displayed lamps only: depending on the setting for “Lamp/Touch Sw
Disp Mode” in the environmental settings, image/library lamps may not be vis-
ible).
"
For “Bit” (lamp bit) and “Label”, direct modification is possible by locating the
cursor where the modification is to be made and pressing the
key.
3. Select the type of modification from the options in the window and execute the
modification.
For an “Image & library lamp” For a “Normal lamp”
S
Set Display: Select to modify the item specified in the window
during setting.
S
Area Position: Select to modify the shape of the lamp graphic.
S
Attrib Posiiton: Select to change the starting position for tiling when
the lamp is on or flashing. This item can only be
used when a polygonal lamp is selected.
S
Label Posiion: Select to modify the position at which the label is
displayed.
S
Ptot Position: Select to modify the position at which image/library
data is displayed when the lamp is off.
S
Light Positioin: Select to modify the position at which image/library
data is displayed when the lamp is on.
4. Press the [Esc] key to quit modification.