Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 113 / 225

94
Creating Fixed Displays
Section 4-3
Press the key to tile the area.
Press the [Esc] key to abort tiling.
8. Press the [Esc] key to quit tiling.
Take the display sequence into consideration when creating screen data (see
p.53).
The tiling patterns on the support tool screen may differ a little from the tiling pat-
terns on the PT screen.
Note If an area which is not closed is specified, the entire screen may be tiled. In addi-
tion, when using an NT610C, if a graphic for which the boundary color is not closed
is specified, the tiling may extend outside the specified area.
Example:
x : Point where tiling is specified
(1): Boundary color
(2): Boundary color
x (1)
x (2)
When tiling is specified at point (1), only the area inside the frame will be tiled, but
when it is specified at (2), the area outside the frame will also be tiled from the part
where the frames overlap.
Note Do not specify tiling inside graphics assigned the “flashing” attribute.