Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 14 / 225

xiii
PT Model
Communication
Support Tool “Direct Access” Setting
PT Model
Communication
Method
Ver.3 Ver.4 Ver.5
NT30/
Host (*2) − ST131/ST141 −
NT30C
NT (*2) − ST131/ST141 −
NT612G
Host (*4) LK210/LK202
(SMR31-V21)
− −
NT (*4) LK201
(SMR34-V21)
− −
RS − − −
C200H LB122
(SMR32-V21)
− −
BUS/2 − − −
NT610C
Host (*4) LK210/LK202
(SMR31-V21)
− −
NT (*4) LK201
(SMR34-V21)
− −
RS − − −
C200H LB122
(SMR32-V21)
− −
BUS/2 − − −
NT620S/ Host (*5) − ST211/ST141 −
NT620C
NT (*5) − ST211/ST141 −
(*1) Since the host interface unit/system ROM are incorporated, the PT model is
indicated. Set “NT20M” as the NT Model with the support tool.
(*2) Since the host interface unit/system ROM are incorporated, the PT model is
indicated.
(*3) There is also a system ROM for use with the process control function
(SMR05).
(*4) When the host link or NT link method of the direct connection function is
used, the DAC function (process control function) can be loaded from the
support tool.
(*5) Since the host interface unit and system ROM are incorporated, the PT
model is indicated. When using an NT620S, set “NT610G (NT612G)” as
the NT Model with the support tool, and when using an NT620C, set
“NT610C”. The DAC function (process control function) can be loaded from
the support tool.
Communication methods are indicated in the table above using the following ab-
breviations:
Host: Host link NT: NT link RS: RS-232C/422
C200H: C200H SYSBUS: SYSBUS