Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 175 / 225

156
Editing Screen Data
Section 4-15
Rotation This function rotates the object of the editing operation by 90
_
in the clockwise
direction.
Rotation is performed with the center of the frame that encloses the object of the
editing operation as the reference point. If a rotation operation would cause the
object of the editing operation to project beyond the edge of the screen, rotation is
not performed.
Only fixed displays can be the objects of “Rotate” operations. The following re-
strictions may also apply depending on the type of object being edited.
Object of Editing Operation Rotation
Continuous line, square, polygon, circle, arc, fan, tiling
f
Character, mark
¢
f
: Can be changed
¢
: Cannot be changed
Procedure 1. Select “EDIT” from the initial editing menu.
2. Select “Rotate” from the editing menu.
3. Select the object of the editing operation.
4. Check the message and press the key.
To abort the operation, press the [Esc] key.