Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 169 / 225

150
Editing Screen Data
Section 4-15
4-15 Editing Screen Data
This section describes how to copy, move, and delete existing screen data.
Selecting the applicable screen data
Editing is executed in existing screen data units.
The method for specifying the object of the editing operation is set with “Edit way”
on the EDIT. The object of the editing operation is selected as follows.
Reference: Depending on the lamp status, which is determined by the setting for “Lamp/TSW
Disp Mode” in the environmental settings, image/library lamps may not be dis-
played and it may not be possible to select them using the “EDIT”.
S
For “In frm” specifications
Procedure 1. Specify the start point of the area that is to encompass the object of the editing
operation.
2. Set the end point at a diagonally opposite point chosen so that the object of the
editing operation is accommodated within the frame.
End point
( )
Start point
Object of the editing operation
Selection frame
( )
The object of the editing operation will be encompassed by a dotted line.
For copy and move operations, a frame the same size as the area enclosed by this
dotted line becomes a cursor and can be moved.
S
For “On frm” specifications
Procedure 1. Specify the start point and end point of an area that contains some part of the
object of the editing operation.
End point
( )
Start point
Selection frame
( )
Objects of the editing operation