Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 110 / 225

91
Creating Fixed Displays
Section 4-3
Deleting Circles/Arcs
Procedure 1. Select “CIRC/ARC” from the fixed display menu and then press the [F1] (De-
lete) key.
A
j
mark will be displayed at the start point of the circle/arc.
2. Locate the cursor at the
j
mark of the circle/arc to be deleted and press the
key.
3. Check the message and then press the key; the circle/arc will be deleted.
To abort deletion, press the [Esc] key.
Modifying Circles/Arcs
Procedure 1. Select “CIRC/ARC” from the fixed display menu, then press the [F2] (Modify)
key.
A
j
mark will be displayed at the start point of the circle/arc.
It is also possible to proceed straight to step 3. by left clicking on the circle or
arc to be modified (see p.57).
2. Locate the cursor at the
j
mark of the circle/arc to be modified and press the
key.
3. Select the required item and execute the modification.
S
Attribute: Select to change the display attribute. This selection is only
valid if using an NT30, NT30C, NT612G, or NT610C.
S
Color: If using an NT30C or NT610C, select to change the line
color.
S
Display position: Select to move the end point of an arc.
Pressing the [Esc] key makes it possible to change the start
point and center point also.
After changing the shape, press the key.
4. Press the [Esc] key to quit modification.