Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 176 / 225

157
Editing Screen Data
Section 4-15
Batch Changing Colors (NT30C and NT60C only)
Used to change the colors for specified data within a specified area in a batch.
Procedure 1. Select “EDIT” from the initial editing menu.
2. Select “ColChg” from the editing menu.
3. Select the objects subject to the batch color change operation.
However, note that a specification to change to transparent color will be ig-
nored if it applies to a part of the image for which transparent color cannot be
used.
4. Specify the color change method and press the key.
5. Check the message and press the key.
"
To abort the batch color change, press the [Esc] key.
Quitting Editing Select whether to quit after saving the result of editing or to quit without saving the
result of editing.
Procedure 1. Press the [Esc] key while the editing menu is displayed.
2. Check the message.
S
Press the key to quit after saving the result of editing.
S
Press the [Space] key to quit without saving the result of editing (the status
before editing started will be re-established).