Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 166 / 225

147
Creating Alarm Lists/Histories
Section 4-13
7. Locate the cursor at the start point for the image & library data display area and
press the
key, then move the cursor to the end position and press the
key once more.
"
If “No” has been specified for “Dsp Image & Lib”, nothing will be displayed.
8. The specified alarm list/history, image & library display area, and scroll keys
will be displayed.
"
If the “Dsp Image & Lib” set in the display settings is 1 to 3 lines, “up” and “down”
line scroll keys will be automatically displayed. If the “Dsp Image & Lib” set was
4 or more lines, “up” and “down” line scroll keys and a page scroll key will be
automatically displayed.
4-13-2 Modifying Alarm Lists/Histories
This is the procedure for changing the contents, display position, etc., of created
alarm lists and histories.
Procedure 1. Select “ALARM” on the initial editing screen.
"
It is also possible to proceed straight to step 3. by left clicking on the alarm list/
history to be modified (see p.57).
2. Select the alarm list/history to be modified and press the key.
"
It is also possible to select the alarm list/history to be modified by left clicking on
it.
3. Select the required item and execute the modification.
Alarm history Alarm list
S
Set Display: Used to modify the item specified in the window dur-
ing setting.
S
Disp Position: Select to change the display position of the alarm
list/history.
S
Disp Pos Image & Lib: Select to change the display position of an image or
library data.