Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 43 / 225

24
“Tool Settings” Screen
Section 3-3
Example
File Selection screen when “612G”, “512B”, and “Ver.3”, respectively, have been
set for these items.
File List NT610G − V3 − O 512KB
PT Type (PT model name)
Direct Access (Direct connection version)
V3 = “Ver.3”
V4 = “none”
*
or “Ver.4”
V5 = “Ver.5”
Direct Macn Type (Direct model)
O = PC made by OMRON
Noting displayed = Direct connection
not used
Memory size
*: For “20M”, “20S”, “600M”, “600S”
Functions of the function keys
[TypSel] [F1] Direct connection setting for PT model . . .
Used to set the “Direct Access” based on the model of PT or system ROM. Since
the settings for “PT Type”, “Memory Size”, “Direct Access” and “Direct Macn Type”
differ according to the PT and the system ROM used, selection based on the mod-
el makes it possible to set all the settings for “PT Type”, “Memory Size”, “Direct
Access” and “Direct Macn Type” at the same time.
(1) Press the [F1] (TypSel) key. The window shown below will be displayed. The
communication methods that can be used are also displayed for your refer-
ence.
When the window is displayed by pressing [F1] (TypSel), the bar cursor is lo-
cated at the PT model which was set for “PT Type”.
(2) Select the model of PT/system ROM being used.
(3) Press the key. The “Tool Settings” screen will be redisplayed with the “PT
Type”, “Memory Size”, “Direct Access” and “Direct Macn Type” settings that
can be used with the selection made in step (2) set.