Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 122 / 225

103
Setting Lamps
Section 4-6
4. Make the necessary settings.
S
Lamp Bit: Set the allocated bit in the PC.
S
Ptot Code: Set the code for the image data or library data that is dis-
played when the lamp is off (when the PC bit is OFF).
S
Press the [F1] (Ref Inpt) key to enable selection of the code
from a list display.
S
If “0” is specified, nothing will be displayed when the lamp is
off.
S
Light Code: Set the code for the image data or library data that is dis-
played when the lamp is off (when the PC bit is ON).
S
Press the [F1] (Ref Inpt) key to enable selection of the code
from a list display.
S
If “0” is specified, nothing will be displayed when the lamp is
on.
5. Press the key with the cursor on “Exec”.
6. Specify the display position for the image data or library data that is displayed
when the lamp is off, and press the
key.
"
If “0” (no display) is set for the code, it is not possible to specify a display posi-
tion.
7. Specify the display position for the image data or library data that is displayed
when the lamp is on, and press the
key.
"
If “0” (no display) is set for the code, it is not possible to specify a display posi-
tion.
8. The screen on which registration fields for lamps can be selected will be dis-
played.
To create another lamp, select a field.
To quit lamp creation, press the [Esc] key.