Omron NT - SUPPORT TOOL 07-1995, Operation Manual

Page: 127 / 225

108
Setting Touch Switches
Section 4-7
S
Screen Switching: Switching to a specified screen when the touch switch is
pressed.
[NT20S, NT600S]
[NT20M, NT600M with Ver.4]
[NT30, NT30C, NT612G, NT610C,
Ver.3 or later]
If using an NT20M or NT600M and not using direct connection, set screen
switching by using the “standalone” function (p.150).
S
SwScreen No.: Specify the screen number of the screen to be dis-
played here. When using an NT30, NT30C, NT612G,
or NT610C with Ver.3 or a later version, if “0” is specified
the display will return to the screen that was displayed
before the current one.
Reference: Screen switching numbers can be specified using either the screen switching win-
dow or the touch switch setting screen.
S
Character keys: Used as input keys when setting character-strings. A
character-string that is the same as the label on the
touch switch is input when the touch switch is pressed.
These keys can only be used when using an NT30,
NT30C, NT612G, or NT610C with Ver.3 or a later ver-
sion of the direct connection function.