Omron F3SG-SR Series, User Manual

Page: 99 / 399

71
F3SG-SR
User’s Manual
Chapter
2
Muting
System Operation and Functions
E
To enable the MUTING state, D3 and d2 must satisfy formulas (3) and (4), respectively.
This distance must prevent the MUTING state from being enabled by a person passing through the
muting sensors. Also, install the F3SG-SR and muting sensors so that each workpiece passes through
all muting sensors before the next workpiece arrives at the first muting sensor.

Wiring diagram (PNP)
Moving direction
Workpiece Workpiece Workpiece Workpiece
Moving direction
+24 VDC
0 V
Power
supply
A2 A1 B2 B1
MUTE A: Gray
B2
A1 A2
B1
F3SG-SR
Using a photoelectric sensor as a muting sensor
Note. Two-wire type muting sensor cannot be used.
Using an NO contact type switch as a muting sensor (PNP)
A1, B1, A2, B2 :
Through-beam type
photoelectric sensor
- PNP Output
- Dark-ON
A1, A2, B1, B2:
NO contact type switch
MUTE B: Pink MUTE A: Gray MUTE B: Pink