Omron F3SG-SR Series, User Manual

Page: 197 / 399

169
F3SG-SR
User’s Manual
Chapter
4
Overview and Specifications
Setting with SD Manager 3
E
4-1-4. SETTING State of F3SG-SR with SD Manager 3 Connected
The F3SG-SR connected with the Intelligent Tap can be transitioned to the SETTING state by the SD Manager 3.
In the SETTING state, two types of access levels called operator level and administrator level can be selected.
For operator and administrator levels, refer to 4-2-5-1. Logging In
In the SETTING state, the F3SG-SR operates as follows.
• The safety outputs are in the OFF state.
• The LED indicator blinks in a cycle corresponding to the access level.
[Operation of LED indicator]
* Refer to [LED indicator blinking patterns] below for more information on the blinking patterns.
The LED indicator of the emitter does not operate in the case the Optical Synchronization is enabled as the emitter is not
connected to the Intelligent Tap.
[LED indicator blinking patterns]
For the access levels, refer to 4-2-5-1. Logging In.
When connecting the Intelligent Tap to a F3SG-SR and trying to return the F3SG-SR to [Detecting], follow step 4 of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR and Intelligent Tap, or click the
[Monitor]
button.
Sensor Indicator
Access Level
Operator Level Administrator Level
Emitter
Code A Blinking once * Blinking twice *
Code B Off Off
Off Off
Blinking once Blinking twice
Blinking once Blinking twice
TOP Off Off
BTM Off Off
Receiver
Code A Blinking once * Blinking twice *
Code B Off Off
Off Off
Off Off
Off Off
Blinking once * Blinking twice *
Blinking once * Blinking twice *
Off Off
TOP Off Off
BTM Off Off
or C CODE
or ERR E
or
L LONG
or T TEST
or C CODE
or
ERR E
or O OSSD
or M MAINT
or P PNP
or F CFG
SEQ S
or
Blinking twice
Blinking once
0.2s
0.8s
2.8s 0.4s