Olympus OEP-3, Service Manual

Page: 11 / 176

1-5
OEP-3 V1 (UC)
8
Introduction
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINT
ALARM
POWER
Location and Function of Parts and Controls
For details, refer to the pages given in parentheses.
Main Panel
1
!
POWER switch
Press to turn the printer on or off.
2
Printer window display Displays messages that also appear along the bottom edge of the monitor screen. Also displays the menu screen line at which the cursor is positioned. If an error occurs, a corresponding error message is displayed. The contrast of the printer window display can be adjusted on the SYSTEM SETUP menu. Also, the printer window display can be cleared on the SYSTEM SETUP menu.
3
Remote sensor Aim the head of the remote control unit toward this sensor.
4
MEMORY PAGE button (31, 44, 72)
Press to select the memory page.
5
SOURCE/MEMORY button (49, 72, 85,
105) Press to select which signal is to be output to the monitor. The memory image and source image are toggled each time you press this button.
6
CAPTURE button (23, 31, 49, 56, 57,
107) Press to capture an image in a memory page.
7
PRINT button (24, 31, 56, 58, 68)
Press to make a printout.
8
Paper ejection slot The printout is ejected here.
9
PRINT lamp Lights while the printer is printing.
0
ALARM lamp (134) Lights in orange when the ink ribbon or paper is exhausted, the paper jams, or another problem occurs.
qa
Front door Pull the top on the front door toward you to open it. Opening the front panel reveals the sub panel buttons, ink ribbon cartridge, paper tray and paper cover.
9
Introduction
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
POWER
A
B
C
D
E
When the front panel is open
A
EJECT button (15)
Press to eject the ink ribbon cartridge.
B
Ink ribbon cartridge (14, 77)
Insert the ink ribbon cartridge.
C
Paper cover (76)
Paper is ejected onto this cover.
D
Paper tray (18, 76)
Load paper into this tray.
E
Sub panel keys
For details, see
“Sub Panel
”
Sub Panel
1
MENU button Press this button to display or clear the menus on the screen and printer window displays.
2
LOAD USER button (26, 125, 126) Press this button to recall a registered user set. Pressing this button causes the currently selected user set to be is displayed for about three seconds. To recall another user set, release the button while the desired user set number is displayed. Each time you press this button, user set is switched in the order of 1, 2, 3.
3
MULTI PICTURE button (41, 57) Press this button to select the desired printout type on the regular screen. When you press this button, the currently selected printout type is displayed for about three seconds. Each time you press this button, the type is switched in the order of 1, 2, 4, 8, 16, 1.... The setting of MULTIPIX on the LAYOUT SETUP menu changes linked with this button setting.
4
PRINT QTY (quantity) button (28) Press this button to set the number of copies on the regular screen. You can set any number up to 9. When you press this button, the currently selected number is displayed for about three seconds. The setting of PRT QTY
Continue to the next page
c