Olympus OEP-3, Service Manual

Page: 58 / 176

1-52
OEP-3 V1 (UC)
102
Installation and Adjustment
Setting Up the Printer (Continued)
W
LA
Y
S
E
T
U
P
[
>
]
IN
D
O
W
S
E
T
U
P
WINDOW SETUP
COLOR : 200
LAY SETUP H START
: 0 DOT (S)
V START
: 0 DOT (S)
H WIDTH
: 896 DOTS
V WIDTH
: 464 DOT (S)
SAVE
: PRESS [ EXEC ]
CANCEL
: PRESS [ EXEC ] : PRESS [ > ]
Q1 A 1
S
W
LA
Y
P
R
E
S
S
[
>
]
IN
D
O
W
:
LAYOUT SETUP
COLOR : 200
/ COL / LAY / PRN / IN / OUT / MEMORY
: FRAME / FIELD
MULTI PIX
: 1 / 2 / 4 / 8 / 16
SEPARATE
: OFF / ON
MIRROR
: OFF / MIRROR
LAMINATION
: GLOSSY /
WINDOW
: PRESS [ > ]
CAPTION
: PRESS [ > ]
Q1 A 1
S
2
Select WINDOW by pressing the
F
or
f
button.
Note
If you go to the next step after you select WINDOW in step 2, the images stored in the memory will be cleared.
3
Press the
g
button.
The WINDOW SETUP menu appears.
4
Adjust the printer according to the printout obtained.
1
Select the item to be adjusted by pressing the
F
or
f
button.
2
Perform the adjustment by pressing the
G
or
g
button.
Position the cursor at WINDOW by pressing the
F
or
f
button.
Press the
F
or
f
button until
WINDOW appears.
103
Installation and Adjustment
V
46
4
D
O
T
S
WI
D
T
H
:
H
89
6
D
O
T
S
WI
D
T
H
:
WINDOW SETUP
COLOR : 200
LAY SETUP H START
: 0 DOT (S)
V START
: 0 DOT (S)
H WIDTH
: 896 DOTS
SAVE
: PRESS [ EXEC ]
CANCEL
: PRESS [ EXEC ] : PRESS [ > ]
Q1 A 1
S
V WIDTH
: 464 DOT (S)
When a black frame is printed or the image is partially cut Adjust the printout size by using the H WIDTH and V WIDTH items from the menu.
Adjusting the printout size horizontally.
Adjusting the printout size vertically.
Position where the black line appears On the right On the left At the top At the bottom When a black line appears on the printout Adjust the printout area according to the position of the line on the printout, by using the H START and V START items on the menu.
Adjustment result The image position shifts to the right with the size remaining as is. The image position shifts to the left with the size remaining as is. The image position shifts up with the size remaining as is. The image position shifts down with the size remaining as is.
Button to be used g
button
G
button
g
button
G
button
Menu adjustment item (defaults) H START (NTSC/PAL: 0) V START (NTSC/PAL: 0)
When you want to Change the screen size horizontally and adjust the position of the right edge. The left edge remains fixed. Change the screen size vertically and adjust the position of the bottom edge. The top edge remains fixed.
Menu adjustment item (defaults) H-WIDTH (NTSC: 896, PAL: 896) V-WIDTH (NTSC: 464, PAL: 560)
Button to be used g
button
G
button
g
button
G
button
Adjustment result Widened at the right edge (toward the right direction of the screen). Narrowed with the left edge remaining fixed. Enlarged downwards. Vertical size reduced with the top edge remaining fixed.
Continue to the next page
c