Olympus OEP-3, Service Manual

Page: 53 / 176

1-47
OEP-3 V1 (UC)
92
Installation and Adjustment
Setting Up the Printer (Continued)
M
ON
I
M
-
G
:
0
M
ON
I
C
-
R
:
0
M
ON
I
Y
-
B
:
0
OUTPUT SETUP
COLOR : 200
/ COL / LAY / PRN / IN / OUT / DISPLAY
: OFF / ON
SOURCE
: THRU / EE
SYNC ON G
: OFF / ON
R
B
N
REMAIN
: OFF / ON
Q1 A 1
S
: 0 : 0 : 0
MONI C
–
R
MONI M
–
G
MONI Y
–
B
7
Adjust the monitor while comparing the printout with the image on the monitor.
1
Select the adjustment item by pressing the
F
or
f
button.
2
Perform adjustment by pressing the
G
or
g
button.
Menu adjustment item MONI C-R MONI M-G MONI Y-B
To reset items to defaults (0) Place the cursor at the adjustment item to be reset, then press the
G
and
g
buttons simultaneously.
8
Press the MENU button. The regular screen appears.
When you want to Make the screen more reddish. Make the screen become cyan (blue). Make the screen more greenish. Make the screen become magenta (pink) Make the screen more bluish. Make the screen more yellowish.
Adjustment direction on the menu Toward R (red) Toward C (cyan) Toward G (green) Toward M (magenta) Toward B (blue) Toward Y (yellow)
Button to be pressed g
button
G
button
g
button
G
button
g
button
G
button
1
Display the desired adjustment item by pressing the
F
or
f
button.
1
Position the cursor at the desired adjustment item by pressing the
F
or
f
button.
2
Make adjustment by pressing the
G
or
g
button.
2
Make adjustment by pressing the
G
or
g
button.
93
Installation and Adjustment
C
OL
O
R
A
D
J
U
S
T
/
C
O
L
/
l
/p
/
i
/o
/
COLOR ADJUST
COLOR : 200
/ COL / LAY / PRN / IN / OUT / LOAD COLOR
: 1 / 2 / 3 TEMP : 1 / 2 / 3 [EXEC]
MAG
–
G
R
N
: 0
YEL
–
B
L
U
: 0
DARK LIGHT SHARPNESS INTERPOL. SAVE COLOR CYN
–
R
E
D
: 0
Q1 A 1
S
: 0 : 0 : 8 : OFF / ON
Adjusting the Printout Color
You can adjust the printout quality by adjusting the color intensity, printout
sharpness and tone (GAMMA) of the printout.
Adjusting the color intensity, contrast and sharpness
You can adjust the color intensity (RED/GREEN/BLUE), contrast (DARK/
LIGHT) and printout sharpness (SHARPNESS/INTERPOL.). You can store up to three settings.
These settings are managed according to the LOAD COLOR number. The color
intensity, picture contrast and sharpness of a printout are determined by recalling one of the three settings according to their LOAD COLOR numbers. This is useful when you are using more than one item of video equipment, each having different characteristics, when you want to print images having different color qualities and picture contrast, and when multiple users access a single printer.
Also, you can make a printout using temporarily set values, without erasing the
stored adjustment values.
Perform the adjustments while viewing the images stored in memory. All values of the color intensity and contrast are factory-set to 0 and the
SHARPNESS is set to 8 for LOAD COLOR numbers 1, 2 and 3.
1
Press the R/G/B/D/L button on the sub panel. The COLOR ADJUST menu appears. Or press the MENU button and display the COLOR ADJUST menu by pressing the
G
or
g
button.
1
2,4,5
3,4,6
7
8
LOAD COLOR button
Continue to the next page
c