Olympus OEP-3, Service Manual

Page: 44 / 176

1-38
OEP-3 V1 (UC)
74
Operation
About the Screen Display (Continued)
R
OF
/
o
n
BN
R
E
M
A
I
N
:
RBN REMAIN
OFF/ON
:
F
To display characters on the video monitor Select ON. To perform the setting for the monitor display on the menu You can also set whether characters are displayed on the video monitor by changing DISPLAY to ON or OFF in the OUTPUT SETUP menu. The setting of the DISPLAY button also changes according to the setting of DISPLAY in the OUTPUT SETUP menu, and vice versa. When you want to see an image that is hedden below a menu You can erase the menu temporarily while holding the DISPLAY button down.
Note
The error messages are always displayed regardless of the setting of the monitor display.
Displa
ying the
T
ype and Remaining Amount of the Ink
Ribbon
You can always display the type of the ink ribbon and its remaining amount on the video monitor.
1
Press the RIBBON REMAIN button. The current setting appears. The video monitor screen is reset to the regular screen after a few seconds.
1,2
The currently selected setting is lit in green.
The currently selected setting is displayed in capital letters.
75
Operation
COLOR : 200
Q1 A 1
S
Q1
A
1
S
CO
L
O
R
:
2
0
0
2
Select ON. Press the RIBBON REMAIN button repeatedly until the color of ON turns green on the video monitor, or until ON is displayed in capital letters on the printer window display. Each time you press the RIBBON REMAIN button, the setting changes in the order ON
c
OFF
c
ON....
To erase the information about the ink ribbon
Select OFF.
Note
Use the ribbon remain display as a criterion. The correct amount remaining of the ink ribbon may not be displayed.
To perform the setting for the display of ink ribbon information using the menu
You can also set whether the type of ink ribbon and its remaining amount are displayed on the video monitor by changing RBN REMAIN to ON or OFF in the OUTPUT SETUP menu. The setting of the RIBBON REMAIN button also changes according to the setting of RBN REMAIN in the OUTPUT SETUP menu, and vice versa.
R
OF
/
o
n
BN
R
E
M
A
I
N
:
RBN REMAIN
OFF/ON
:
F
Switch ON to green.
Display ON in capital letters.
Video monitor
Printer window display
Type of ink ribbon When the ink ribbon runs out or is not loaded, the message
“INSERT
RIBBON
” appears.
200: Number of printouts that can be made with the ribbon (remaining amount of the ink ribbon)